Your first steps with VEEV device
Learn everything about your start with VEEV device:
How to use your device properly, as well as tips and tricks for the best possible experience.
VEEV device
How to use your VEEV device for the first time.
- Unbox
Get ready for a new experience with VEEV device and make sure you have everything you need before starting: the device, a manufacturer-approved Charging Cable with a certified AC Power Adaptor and your favorite VEEV device consumable. - Prepare
Insert the V-CERAMIC™ pod into your device and get ready to enjoy the device. - Switch ON
Make sure your VEEV device is charged enough to start the experience. Before first use, turn on your device by pressing and holding the ON/OFF button for three seconds, then release. Four white lights will turn on slowly to indicate that the device is ready for next uses. - VEEV device
It’s simple: just start using! Take smooth draws to ensure the ideal vaping experience with VEEV device. You can always change the V-CERAMIC™ pod while your device is turned on. - Turn OFF
If VEEV device is unused for three seconds, it will automatically go in sleep mode to save battery.
You can manually turn off the device by pressing the ON/OFF button for three seconds until all the status lights fade out.
Tips and Hints
Battery check.
- With VEEV device, you always know when it is time to charge. You can easily check the charge level of the device by briefly pressing the ON/OFF button: four white lights will turn on to indicate the status of the battery.
- one white LED on = 25% - 1% charged
- two white LEDs on = 25% - 50% charged
- three white LEDs on = 50% - 75% charged
- four white LEDs on = >75% charged
Don’t cover Airflow holes.
To ensure a proper aerosol delivery, air needs to be always able to flow through your device: when drawing, make sure that the two airflow holes, placed on the side of your device, are not occluded by your fingers or any other blockage.
How to change your V-CERAMIC™ pod.
You can easily change the V-CERAMIC™ pod while your VEEV device is turned on, at any time and on the go. When a new V-CERAMIC™ pod is inserted, status lights will turn on slowly to indicate that the device is ready for use.